SWOOD
Vanity Hall SWOOD Center
View transcript
Hi, my name is Franklin. I'm a SWID Applications Engineer here at Solid Solutions, and this is a short video for Vanity Hall to just go over the benefits of both the SWID Center and the SWID Center Service modules. So I've been working with this accent frame here that you've provided, and I've managed to configure within SWID Center a few parameters that we can change. For example, the overall dimensions, depth, height, and width, the material of different areas of the design, the drawers, the doors, and the overall frame, as well as the quantity of drawers and whether they are shallow or deep. And so right here, I'm changing the depth, height, and width in the SWID Center form in the user interface, and by clicking that compute button in the top left, it does all the changes in the background to create the new version of that frame. Now this SWID Center project was created using very similar techniques to SWID Box creation, creating parameters, linking them to different SOLIDWORKS items, and then scripting their behavior. So it should all be very familiar. So we'll change the number of draw sections to 3, and we'll change auto spacing to be off so that we can modify the spacing of the draw units. Toggling auto spacing off has allowed the drawers to be uneven widths, and this has given us even more parameters that we can change. We're going to change the width of the left and center drawers to be 350, and then we'll rebuild again to see those changes. One of the big benefits of SWID Center is that you only need to design and script each unit once, and then any future configurations you need to make can be generated with ease, removing tedious and repetitive work implementing those changes. Here we're changing the material of all panels in the design to be driftwood, and we're changing the large drawer to be deep instead. And again with a hit of that compute button all of that is done in the background and you can see those changes occur in the graphics area. Once your unit is exactly as you would like it, a report can be generated as normal, and this is going to contain all of the relevant information such as labels, hardware lists, and panel lists. So SWID Center Configurator is great, but the next step up in automation comes from an additional module called SWID Center Service. This module allows for batch processing and automatic generation of SWID Center models, nests, and reports. In the SWID Center Manager application, jobs can be defined that contain a batch of orders that need to be generated and processed. We can select the SWID Center model we would like to use for each order, in this case it's your accent model that we looked at earlier, and we can modify the SWID Center Configurator parameters to modify the design to our liking. Here you can also use design specification data exported from an ERP system to autofill these parameters if the two are linked. Here we're creating three units, one that has two drawers and is made of plywood, one with three drawers made of driftwood, and one with four drawers, it's a little bit larger and taller made from veneer oak. Once all of your designs are defined, we can combine them into a single nesting project to allow for the most efficient use of material. Here we can also add standard frames that do not need to be customized, so both standard and special frames can be included in the same nest. We'll add each of our frames to this nest and increase the quantity of the plywood frame to two. Once that's all done, we can hit the generate all button to begin the automatic creation of the SWID model, the reports, and the nest. These will move into the completed bucket once generated, and we can open the folder to see the result. So the first frame was two sets of drawers in a plywood material, you can see that this has been generated successfully. For the second unit, we'll have a look at the reports. This has also been created automatically for each different frame. And finally, we have our auto-generated nesting assembly made up of two instances of the plywood frame and one instance of the other two. And you can see that this has had machining applied to it automatically when it was generated, meaning it can be sent straight to the machine. So hopefully this has shown you the benefits of implementing SWID Center into your workflow. It's a huge time saver when you're looking to make lots of variations of the same units. For more information, please contact Nick Jones, Adam, or myself using the contact info below, or give us a ring using the number on screen. Thank you.